DMX circuit
terminator or connect a booster
after maximum 32 fixtures.
The operation mode can not be
changed
The device is in Slave mode
If the device is in Slave mode, it
will wait for a master signal unless
there is a DMX signal present. Set
the device to Master to activate the
sound-controlled or automated
operation modes.
Pan and/or Tilt range is minimum
The Pan and / or Tilt range needs
to be reset
Check that the Pan or Tilt range is
set as desired on your DMX
controller and correct as needed.
Pan and/or Tilt work in reverse
Pan or tilt inversion is set
Check pan or tilt inversion settings
and switch them on or off as
required.
The projected bundle is not sharp
Set the optical elements correctly
This device has various elements
that constantly optimise or change
optical properties. The sharpness
of a projection can depend on the
placement of the device or the
space in which is it placed. Use
the motorised focus and other
optics adjustment options to
sharpen the projection.
The information shown in this user manual could be subject to change without further notice.
Version: 1.1
Date of creation and initials of author: 07-10-2019 RV
Date of revision and initials of author: -
