47
Viewing the Status of a Neurostimulator
Neurostimulator Errors
1
If a Neurostimulator error is present, a “Query Fault”
button will appear to the right of the “Disconnect” button
in the lower right corner of the
Patient Device
screen.
When the “Query Fault” button is pressed, a pop-up will
2
appear
(①)
with a description of the error
(②)
.
To resume the communication session and try to resolve
the error with reprogramming, press “Clear Fault”
(③)
to remove the error notification from the
Neurostimulator. If additional errors exist, the pop-up will
4
3
display information about the next error, which will also
need to be cleared.
Press “Cancel” to exit the pop-up
(④)
. If the pop-up is
exited without clearing the errors, the ability to program
the Neurostimulator may be impaired.
