Axminster 107655, Оригинальное руководство пользователя

Страница: 13 / 60

CHANGING THE BELT SPEED
MAINTENANCE
13
Figure 22
With the motor access door open, gives
access to the motor pulley.
Figure 23
Loosen the motor’s lift and shift handle and lift
the motor plate handle to give enough slack
in the belt to enable it to be moved.
Daily after use
•Clean wood shavings away from the lathe bed and
tool rest.
•Smear a light coat of wax (Protec Tool Wax Polish,
Order no. 211835 ) over the lathe bed to allow
the Banjo and Tailstock to run more smoothly over
the bed and to prevent corrosion. •Check the tension of the belt and adjust, (See pages
11 & 12 for Changing the Belt Speed).
•Check any build up of wood shaving on the motor
and spindle pulley’s and clean if necessarily.
• Using an airline, blow out the motor’s air vent.
Monthly
Note: If the lathe is not going to be used for a period of time, smear a light
coat of wax over the bed and place a dust sheet over the lathe
Wax Points