Axminster Trade 106202, Оригинальное руководство пользователя

Страница: 19 / 28

Maintenance
19
Table Lifting Column Table Rise & Fall Screw Mechanism
Autofeed Drive Wheel
Thicknessing Table
1. To the side of the lifting column housing there is a grease
nipple to lubricate the inner column. If you notice after a
period of time that the table is becoming harder to raise
and lower or a grinding noise when adjusting the table, it
could be a sign that the inner column needs lubricating.
2. Using a grease gun inject small amounts of grease into
the inner column, raise and lower the table to work the
grease around the column. It is recommended to do
this once or twice a year, see fig 38-39.
Fig38-39
NOTE: DO NOT INTRODUCE TOO MUCH GREASE
INTO THE COLUMN AT ONE TIME!
Table column
grease nipple
If the thicknesser is not going to be in
use for long periods, apply a light coat
of ‘Lubricating Wax’ (2) over
the thicknessing table.
2
It it recommended to grease the tables rise and fall screw
mechanism once or twice a year. Smear a light coat of grease
around the length of the screw that is exposed. Raise and lower
the table to work the grease around the full length of the screw
and the warm gear drive machanism, see fig 40.
Fig 40
Fig 41
1. If the autofeed function lever is not disengaged after every
use, over time depressions will form to the centre of the drive
wheel. Check for any signs of wear on the autofeed wheel.
2. Check yearly for signs of side play in the autofeed drive
wheel, see fig 41. If there is side play movement or
depressions in the drive wheel, contact our after sales
department on 0800 371822 for assistance.
Rise & Fall screw
Worm gear drive