Axminster Craft AC250CM, Руководство пользователя

Страница: 15 / 56

Assembly Instructions
15
4) Place a 90˚degrees square against the fence and adjust
the assembly until the fence is perpendicular to the table,
tighten the clamping handles to lock the guard in place,
see fig 40.
Fig 40
Wheel Mobility Kit
Fig 41
The wheel mobility kit enables the combination machine
to be moved easily to a new location. The kit comprises of
two adjustable wheel carriages (A) that bolts to each side
of the machine, a mobility operating handle (B) and lifting
bracket (C). Follow the instruction below to assemble the
kit.
1) Put to hand eight M8 cap head bolts and washers and
the two wheel carriages (A). Line up the four holes in one
of the wheel carriages mounting brackets with the four
threaded holes to one side of the machine and secure
using the M8 cap head bolts and washers, see figs 41.
Tighten using the supplied Hex key. Repeat for the
remaining wheel bracket.
2) Locate the lifting bracket (C) and two M8 cap head
bolts and washer. Line up the two pre-drilled holes in
the bracket with the threaded holes to the base of the
machine and secure in place with the M8 cap heads, see
figs 42-43.
Fig 42-43
M8 Cap head bolts
Lifting point hole
M8 Cap head bolt
Pivot bolt
Locking nut
Raise and
lowing bolt
Fence
Square
C
A
Manoeuvring the Machine
1) Turn the “raise and lowing bolts” on the wheel
carriages clockwise until the rear feet are lifted away from
the floor then nip up the locking nut to secure the setting.
2) Locate the mobility operating handle (B), insert the
handles lifting bar into the hole in the lifting bracket (C),
see fig 44 and push down the handle to raise the machine.
Fig 44
Ascertain the orientation of the machine and move it to
its desired position in the workshop. Ensure that the
machine is positioned to allow sufficient clearance all
round to cater for the maximum length of timber you
wish to machine. The machine should be positioned on a
flat level surface.
Continues Over....
Positioning the Machine
Handle lifting bar
B