Installation
Installation
PTZ
CAMERA
PTZ
CAMERA
008
009
Remove the protection of cover attached each component after picking the
product out from box.
Remove the protection of film from Top
case.
Unite both Top Case and Bottom Case
using + driver.
(Screw Locking Torque : 8.0 kgf.cm)
Take the protection of film of Camera
Lens out from Bottom Case.
Set up the bracket which is packed
with product as option on the wall.
Make a decision the place for Camera
angle in order not to be bothered.
Just double-check the wiring hole
whether it is size enough or not and
then set it up horizontally.
Remove the protection of cushion from
Bottom Case
Unite with the product if setting for
bracket is done. Connect both Safety
Wire and product first because product
is heavy.
