Axis TNS-2 series, Руководство пользователя

Страница: 16 / 23

OSD Menu Setting OSD Menu Setting
PTZ CAMERA PTZ CAMERA
030 031
J-2. ALARM INPUT
Set up the sensing way of ALARM or Using ARARM.
- [OFF/NO/NC] can be set up.
- NO's meaning is Normal Open and handle the CLOSE to NORMAL of OPEN.
- NC's meaning is Normal Close and handle the OPEN to NORMAL of CLOSE.
- It should be controlled by using LEFT/RIGHT of Joystick.
J-3. ALARM ACT
This is for registration the operating when occur ALARM.
- The number of registration for PRESET is [1..64, 100..200]/TOUR[01..08]/
PATTERN[01..08]
- PRESET is marked with 3words and changed to ([001..064], [100..200])
automatically.
- TOUR is marked with 3words of [P01...P08]. Each PATTERN is YOUR[1...8].
- PATTERN is marked with 3wordsof [T01...T08]. Each is TOUR[1..8].
- In case of PRESET, ACTION is over after completion of moving for PRESET
position.
- In case of TOUR/PATTERN, ACTION is over after completion each 1 time.
J-4. AUX ACT
On occurrence ALARM, it's function for controlling the outdoor PORT.
- You can choice between BLK/AUX1/AUX2
- When setting to BLK, on occurrence the ALARM, There's no changing AUX
terminal.
- On setting AUX1, it should handle the terminal into on when occurrence
ALARM.
- On setting AUX2, it should handle the terminal into on when occurrence
ALARM.
- The holding time for ON of each AUX terminal is fasten 5sec.
J-5. SAVE
This is for saving the set value, NO is raised up 1, when Cursor places to
ALARM NO.
J-6. EXIT
This is used to take off the ALARM MENU.
I-2. PATT TITLE
On working PATTERN, the function for inputting the characters for title if
showed up on the screen.
- Default os for "PATTERN01 □□□□□□□ "
- The changing of character can be set up using the Left/Right/Up or Zoom
In/Out of joystick.
I-3. DATA FILL
This is for marking when saving or status of PATTERN DATA.
- If you press the Focus Far Key, "DATA FILL" would be blinked and get started
saving of Manual value. In this time, if data saved by 99%, Cursor could be
placed on the save automatically after stop the operation.
- Blinking of DATA FILL would be stopped and DATA saved on the right
would be signed to "%" if you press the Focus Far Key after Manual
adjustment is finished.
I-4. SAVE
This is for saving the data set and in case saving the value, Cursor would be
moving on PATT NO and the value of NO grows up each 1.
I-5. EXIT
It is used to take off the PATTERN SET MENU.
J-1. ALARM NO.
It can be chosen the ALARM number that you'll set .
ALARM SET
ALARM NO. : 01
ALARM INPUT : OFF
ALARM ACT : 001
AUX ACT : BLK
SAVE
EXIT
J. ALARM
You can get the function in using Left/Right of Joystick after ALARM in Main
Menu and it makes it operating special when it senses the changing the 4ports
inside.