Axis TNS-2 series, Руководство пользователя

Страница: 14 / 23

OSD Menu Setting OSD Menu Setting
PTZ CAMERA PTZ CAMERA
026 027
G-1. TOUR NO.
This is for Menu for choice the GROUP NUMBER of TOUR that you'll set it up
into GROUP out of 8 of TOUR. Possibly choice 1~8.
G-2. TOUR TITLE
ID for tour can be registered as option by user within range of 16words.
- Default is for ""TOUR**"". (* is for TOUR NUMBER)
- You can change the character with PAN LEFT/RIGHT and position with
ZOOM IN/OUT.
- For make ID changing over, move to OSD MENU by controlling TILT.
G-3. TOUR STEP
This is for turn of playback of PRESET you'll design the GROUP. Possibly it
could be registered 60 in maximum and PRESET will working as turn.
G-4. PRESET NO.
This is for registration the PRESET to TOUR STEP.
- Choose the PRESET number using LEFT/RIGHT of Joystick.
- You can input it directly using [1..64],[100,255]+ Preset.
- The color for PRESET should be changed in case that PRESET isregistered.
G-5. DWELL TIME
This is for setting the holding time after moving is finished to relevant
PRESET.
- The value for setting is 1~99, you can input it directly using [1-99]+Preset.
G. TOUR
You can use this function using Left/Right of Joystick after choice the TOUR in
the Main Menu.
AUTO SCAN SET
TOUR NO. : 01
TOUR TITLE : TOUR01
□□□□□□□□□□
TOUR STEP : 01
PRESET NO. : 001
DWELL TIME : 03
SPEED : 300º/S
SAVE
EXIT
F-1. START / END ANGLE
Possible to set up the position of beginning and end of Auto Scan.
- You can control the only position of PAN from each menu of START ANGLE/
END ANGLE in basic screen.
- In case you change the position of TILT or ZOOM, it'd be possible only with
status changed mode by pressing FOCUS FAR.
(In this time, PAN/TILT/ZOOM Possible.)
-The position of PAN should be decided into each position of START/END
and position of TILT or ZOOM would be decided into last day controlled
without relationship of START/END.
(Control of TILT and ZOOM should be applied to same position of START/
END.)
- The coordinate of PAN/TILT signed in START ANGLE would be marked into
coordinate in case of entering MENU, when position of cursor moved on
START/END ANGLE, it would be changed to current position .So there is no
way to check the position saved.
F-2. DIRECTION
Feasible to set up the direction of rotation of PAN.
- You can set it up into CW/CCW.
F-3. ENDLESS
On ON, Endless keeps rotating into direction set from DIRECTION regardless
of position of START/END.
F-4. SPEED
You can set up the speed of revolution of PAN from 01º/S to 35º/S. Possibly
input into Direct using [1-35]+Preset after place the Cursor on the SPEED
Menu.
F-5. DWELL TIME
On OFF of ENDELSS, you can set up the time stopped when approaching
each position of START/END. The value for setting is 1~99, input directly
using [1-99]+Preset.
F-6. SAVE AND EXIT
It's used to save and take off the Menu after setting completed.
F-7. EXIT
It's used to take off the Menu not saving setting value.