TECHNICAL AND MOTION DOCUMENTATION
___________________________________________________________________________________________________
14
- searching of computer database resources, e.g. orders for realization are displayed
successively,
- entering parameters of balance indications, e.g. unitary weight during pieces number
measurement or tare,
- finishing transaction by sending measurement result to the computer, transaction
confirming or deleting,
- slip or self-adhesive label printing, which documents the measurement (transaction).
10. Special functions
Besides the basic metrological functions, weighing and tare setting, balances may have
special functions: automatic sending of measurement result, pieces counting, automatic
zeroing, comparing with threshold values. Special functions are available for user on
demand.
The available functions may be viewed after pressing the functional key “F”. The
functions are displayed with the successive numbers: F1-LIC, F2-AUt, etc.. During the
special functions switching the display shows the
MODE
indicator.
10.1. Function of automatic measurement result sending (F..-ATO)
This function allows for sending measurements results without using
key.
Operations sequence:
1.
Press key
MENU
of balance.
2.
During displaying
F...-ATO
press
ENTER
.
3.
To activate automatic mode, during displaying
F..-1
press
ENTER
(F..-0 deactivates
automatic mode).
10.2. Function of setting threshold value for automatic balance operation
mode (F..-LO)
This function is connected with above function of balance automatic operation. It allows
for entering the threshold value, below each the balance indication must be to allow for
next measurement in automatic mode. By default value 0.5*MIN is used, and using LO
function is not required..
Operations sequence:
1.
Press key
MENU
of balance.
2.
During displaying
F..-1
press
ENTER
.
3.
Enter threshold value and press
ENTER
.
