AXIS Q6054-E PTZ Dome Network Camera
Access the Product
•
In low-light scenarios, where the autofocus is challenged by the lighting conditions.
Note
• The focus recall overrides the camera’s autofocus at the specific pan/tilt range.
• A preset position overrides the focus setting saved in the focus recall area.
• The maximum amount of focus recall areas is 20.
The image shows an example of a focus recall area marked with a white square. As soon as the camera detects the focus recall area, the
camera recalls the previously set focus. This means that, in this example, the focus is set on the car regardless of zoom factor.
How to add a focus recall area
1. Pan, tilt and zoom into the area where you would like to have focus.
2. Set the focus, either use the autofocus or adjust manually by using the focus bar.
3. Click on the focus recall button
. The button toggles from plus to minus to show that the focus recall area is added.
How to remove a focus recall area
1. Pan, tilt and zoom to enter the focus recall area.
13
