Axis Q6045-E Скачать руководство пользователя страница 40

Страница: 40 / 67

AXIS Q6045-E Mk II PTZ Dome Network Camera

Events

Live Stream Accessed

– Trigger the rule when any stream is accessed and during edge storage playback.

This can for example be used to send notifications.

Motion Detection

– Trigger the rule when motion is detected. See

Motion Detection on page 32

Shock Detection

– Trigger the rule when the Axis product detects it has been tilted or hit. See

Shock Detection

on page 32

Enter/Exit

– Trigger the rule when an object has entered or exited the area. See

Enter/Exit Detector on page 34

Fence Detector

– Trigger the rule when an object has crossed a virtual line. See

Fence Detector on page 35

Object Removed

– Trigger the rule when an object has been removed from a scene. See

Object Removed

on page 33

•

Hardware

Casing Open

– Triggers the rule if the casing of a connected external device, such as a junction box or cabinet

(not included), is removed or opened. This can for example be used to send notifications of maintenance or
unauthorized tampering.

Fan

– Trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance

notifications.

Heater

– Trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance

notifications.

Network

– Trigger the rule if network connection is lost or restored. This can for example be used to start

recording to the SD card.

Temperature

– Trigger the rule if the temperature falls outside or inside the operating range of the product. This

can for example be used to send maintenance notifications.

•

Input Signal

Manual Trigger

– Trigger the rule using the

Manual Trigger

button in the Live View page. See

Controls on

the Live View Page on page 11

. This can for example be used to validate actions during product installation

and configuration.

Virtual Inputs

– can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for

example, be connected to buttons in the VMS user interface.

•

PTZ

Autotracking

– Trigger the rule when autotracking starts or stops. See

Autotracking on page 27

Error

– Trigger the rule if the PTZ functionality is not working correctly. This can for example be used to

send maintenance notifications.

Moving

– Trigger the rule when the camera view moves due to a PTZ operation. This can for example be used

as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.

Preset Reached

– Trigger the rule when the camera stops at a preset position. This can be for example be used

with the Send Images action to upload images from the preset position.

Ready

– Trigger the rule when the PTZ functionality is ready to be used. This can for example be used to steer

the camera to a specific preset position when the product is started.

•

Storage

Disruption

– Trigger the rule if storage problems are detected, for example if the storage device is unavailable,

removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance
notifications.

Содержание Q6045-E




































































Результаты поиска

Содержание Q6045-E

Отзывы:

Похожие инструкции для Q6045-E

Бренды по названию

Популярные бренды

Axis Q6045-E, Руководство пользователя

Результаты поиска

Содержание Q6045-E

Отзывы:

Похожие инструкции для Q6045-E

Бренды по названию

Популярные бренды