Axis Q6045-E Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 67

background image

AXIS Q6045-E Mk II PTZ Dome Network Camera

System Options

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted
into the Axis product.

To enable automatic formatting, follow these steps:

1. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

2. Click

SD Card

.

3. Under

General Settings

, select

Autoformat to

.

4. Click

OK

to save settings.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:

1. Insert the SD card in the SD card slot.

2. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

3. Click

SD Card

.

4. Click

Format

and select the desired file system.

5. Click

OK

to start formatting the card.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for
recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to

www.axis.com/se/sv/products/axis-camera-companion/support-and-documentation

Note

For NAS recommendations see

www.axis.com

To add a network share:

1. Go to

System Options > Storage

.

2. Click

Network Share

.

3. Enter the IP address, DNS or Bonjour name to the host server in the

Host

field.

4. Enter the name of the share in the

Share

field. Sub folders cannot be used.

5. If required, select

The share requires login

and enter the user name and password.

6. Click

Connect

.

To clear all recordings and data from the Axis product’s folder on the designated share, click

Clear

under

Storage Tools

.

To avoid filling the share, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select

Lock

under

Recording Settings

.

Maintenance

The Axis product provides several maintenance functions. These are available under

System Options > Maintenance

.

57

«
...
55
56
57
58
59
...
»

Содержание Q6045-E




































































Отзывы:

Нет отзывов

Похожие инструкции для Q6045-E

Бренд: Olympus Страницы: 46

Бренд: M86 Security Страницы: 86

Бренд: Radionics Страницы: 10

Бренд: L-Sniper Страницы: 12

Бренд: Eaton Страницы: 32

Бренд: Observint Страницы: 2

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 9

Бренд: Paradox Страницы: 35

i Snap - i Snap APS Camera

Бренд: Olympus Страницы: 22

Бренд: D-Link Страницы: 2

DCS-1130 - mydlink-enabled Wireless N Network...

Бренд: D-Link Страницы: 58

Бренд: Y-cam Страницы: 8

Бренд: Zhejiang Страницы: 33

Бренд: Neostar Electronics Страницы: 2

Бренд: GCE Страницы: 28

Бренд: Pentax Страницы: 124

Бренд: Majorcom: Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды