Axis Q6045-E Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 67

Axis Q6045-E Скачать руководство пользователя страница 8

AXIS Q6045-E Mk II PTZ Dome Network Camera

Hardware Overview

NO

NO

NOTICE

TICE

TICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see

Electromagnetic Compatibility (EMC) on page 2

.

NO

NO

NOTICE

TICE

TICE

To comply with the IP66-rated design of the camera and maintain the IP66 protection, the supplied RJ45 Push-pull Connector
(IP66) shall be used. Alternatively, use the RJ45 IP66-rated cable with premounted connector which is available from your
Axis reseller. Do not remove the plastic network connector shield from the camera.

SD Card Slot

NO

NO

NOTICE

TICE

TICE

• Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.

• Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to

Setup >

System Options > Storage > SD Card

and click

Unmount

.

This product supports SD/SDHC/SDXC cards (not included).

For SD card recommendations, see

www.axis.com

Control Button

For location of the control button, see

Hardware Overview on page 7

.

The control button is used for:

•

Resetting the product to factory default settings. See

page 59

.

•

Connecting to an AXIS Video Hosting System service. See

page 52

. To connect, press and hold the button for about 3

seconds until the Status LED flashes green.

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 52

. To connect, press and hold the button for about 3 seconds.

Power Button

Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See

page 59

.

LED Indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Red

Flashes red for firmware upgrade failure.

8

«
...
6
7
8
9
10
...
»

Содержание Q6045-E




































































Отзывы:

Нет отзывов