Axis Q6045-E Скачать руководство пользователя страница 12

Страница: 12 / 67

AXIS Q6045-E Mk II PTZ Dome Network Camera

Access the Product

The product’s heater is controlled by the ambient temperature and is turned on and off automatically.
If required, the heater can be activated manually by clicking the

Heater

button. To show the button,

go to

Setup > Live View Config

. Under

Action Buttons

, select

Show heater button

and specify the

number of minutes the heater should be activated.

Enable or disable the

Gatekeeper

by selecting On or Off from the drop-down list. For more information

about the Gatekeeper, see

page 28

Manual Trigger

The

Manual Trigger

is used to trigger an action rule from the Live View page. The manual trigger can for example be used to

validate actions during product installation and configuration.

To configure the manual trigger:

1. Go to

Setup > Events

2. Click

Add

to add a new action rule.

3. From the

Trigger

drop-down list, select

Input Signal

4. From the second drop-down list, select

Manual Trigger

5. Select the desired action and configure the other settings as required.

For more information about action rules, see

Events on page 39

To show the manual trigger buttons in the Live View page:

1. Go to

Setup > Live View Config

2. Under

Action Buttons

, select

Show manual trigger button

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See

AXIS Media Control (AMC) on page 14

for more

information. The toolbar displays the following buttons:

The

Play

button connects to the Axis product and starts playing a media stream.

The

Stop

button stops the media stream.

The

Snapshot

button takes a snapshot of the video image. The location where the image is saved can be specified

in the AMC Control Panel.

Click the

View Full Screen

button and the video image will fill the entire screen. Press ESC (Escape) on the computer

keyboard to cancel full screen view.

The

Record

button is used to record the current video stream on your computer. The location where the recording is saved

can be specified in the AMC Control Panel. Enable this button from

Live View Config

Viewer Settings.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under

System Options > Security > Users

With the

PTZ Control Queue

enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or

release control of the PTZ controls. The PTZ Control Queue is set up under

PTZ > Control Queue

Содержание Q6045-E




































































Результаты поиска

Содержание Q6045-E

Отзывы:

Похожие инструкции для Q6045-E

Бренды по названию

Популярные бренды

Axis Q6045-E, Руководство пользователя

Результаты поиска

Содержание Q6045-E

Отзывы:

Похожие инструкции для Q6045-E

Бренды по названию

Популярные бренды