Axis Q6044-E Скачать руководство пользователя страница 12

Страница: 12 / 60

AXIS Q6044-E PTZ Dome Network Camera

Accessing the Product

Pan and Tilt bars

– Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the

camera view to that position.

Zoom bar

– Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.

Focus bar

– Use the arrows to focus the camera, or click on a position on the bar to set the focus position. Using the

focus bar will disable the product’s autofocus. To re-enable, use the PTZ control panel which is opened by clicking
the

Ctrl panel

button (see above).

Iris bar

– Click on a position on the iris bar to change the degree to which the iris is opened. This will disable the

product’s auto iris. To re-enable, use the PTZ control panel which is opened by clicking the

Ctrl panel

button (see above).

Brightness bar

– Click on a position on the brightness bar to adjust the image brightness. This setting will not be saved.

To make a saved change, go to

Setup > Video > Camera Settings > Brightness

and adjust the brightness.

The PTZ controls can be disabled under

PTZ > Advanced > Controls

, see

Controls, on page 29

Содержание Q6044-E





























































Результаты поиска

Содержание Q6044-E

Отзывы:

Похожие инструкции для Q6044-E

Бренды по названию

Популярные бренды

Axis Q6044-E, Руководство пользователя

Результаты поиска

Содержание Q6044-E

Отзывы:

Похожие инструкции для Q6044-E

Бренды по названию

Популярные бренды