Axis Q6044-E, Руководство пользователя

Страница: 35 / 60

AXIS Q6044-E PTZ Dome Network Camera
Events
- Disruption — trigger the rule if storage problems are detected, for example if the storage device is unavailable,
removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance
notifications.
- Recording — triggers the rule when the Axis product records to the storage device. The recording status trigger
can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to
record to the storage device. Note that, this trigger can be used only for edge storage recording status.
• System
- Shock Detected — Trigger the rule when the Axis product detects it has been tilted or hit. See Shock Detection,
on page 30 .
- System Ready — trigger the rule when the product has been started and all services are running. This can for
example be used to send a notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see Recurrences, on page 38 . This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 37 .
Available actions include:
• Day/Night Vision Mode — set day mode (IR cut filter on) or night mode (IR cut filter off).
•
Overlay Text
— display an overlay text, see
Using Overlay Text in an Action Rule, on page 21
.
•
PTZ Control
- Autotracking — start autotracking, see Autotracking, on page 26 .
- Preset Position — go to a preset position.
- Guard Tour — start a guard tour, see Guard Tour, on page 27 .
• Record Video — record video to a selected storage.
• Send Images — send images to a recipient.
• Send Notifications — send a notification message to a recipient.
• Send Video Clip — send a video clip to a recipient.
Setting Up an Action Rule
An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an
email notification. If multiple conditions are defined, all of them must be met to trigger the action.
The following example describes how to set up an action rule to record video to a network share if there is movement in the
camera’s field of view.
Set up motion detection and add a network share:
1. Go to Detectors > Motion Detection and configure a motion detection window, see page 30
2. Go to
System Options > Storage
and set up the network share, see
page 49
.
Set up the action rule:
1. Go to Events > Action Rules and click Add .
2. Select Enable rule and enter a descriptive name for the rule.
35