AXIS Q6042-S PTZ Dome Network Camera
System Options
System Options
Security
Users
User access control is enabled by default and can be configured under
System Options > Security > Users
. An administrator can
set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means
that anybody may access the Live View page.
The user list displays authorized users and user groups (access levels):
Viewer -
Access to the Live View page
Operator -
Access to the Live View page and to all settings except System Options
Administrator -
Unrestricted access to all settings; can add, modify and remove other users.
Note
Note that when the option
Encrypted & unencrypted
is selected, the webserver will encrypt the password. This is the default
option for a new unit or a unit reset to factory default settings.
Under
HTTP/RTSP
Password
Settings
,
select
the
type
of
password
to
allow.
You
may
need
to
allow
unencrypted
passwords
if
there
are
viewing
clients
that
do
not
support
encryption,
or
if
you
upgraded
the
firmware
and
existing
clients
support
encryption
but
need
to
log
in
again
and
be
configured
to
use
this
functionality.
Under
User
Settings
,
select
the
Enable
anonymous
viewer
login
option
to
allow
anonymous
users
access
to
the
Live
View
page.
Select
the
Enable
anonymous
PTZ
control
login
to
allow
anonymous
users
access
to
the
PTZ
controls.
Deselect
the
Enable
Basic
Setup
option
to
hide
the
Basic
Setup
menu.
Basic
Setup
provides
quick
access
to
settings
that
should
be
made
before
using
the
Axis
product.
ONVIF
ONVIF
(Open
Network
Video
Interface
Forum)
is
a
global
interface
standard
that
makes
it
easier
for
end
users,
integrators,
consultants,
and
manufacturers
to
take
advantage
of
the
possibilities
offered
by
network
video
technology.
ONVIF
enables
interoperability
between
different
vendor
products,
increased
flexibility,
reduced
cost
and
future-proof
systems.
By
creating
a
user
you
automatically
enable
ONVIF
communication.
Use
the
user
name
and
password
with
all
ONVIF
communication
with
the
product.
IP
Address
Filter
IP
address
filtering
is
enabled
on
the
System
Options
>
Security
>
IP
Address
Filter
p age.
Once
enabled,
the
listed
IP
address
are
allowed
or
denied
access
to
the
Axis
product.
Select
Allow
or
Deny
from
the
list
and
click
Apply
to
enable
IP
address
filtering.
The
administrator
can
add
up
to
256
IP
address
entries
to
the
list
(a
single
entry
can
contain
multiple
IP
addresses).
HTTPS
HTTPS
(HyperText
Transfer
Protocol
over
Secure
Socket
Layer,
or
HTTP
over
SSL)
is
a
web
protocol
providing
encrypted
browsing.
HTTPS
can
also
be
used
by
users
and
clients
to
verify
that
the
correct
device
is
being
accessed.
The
security
level
provided
by
HTTPS
is
considered
adequate
for
most
commercial
exchanges.
The
Axis
product
can
be
configured
to
require
HTTPS
when
users
from
different
user
groups
(administrator,
operator,
viewer)
log
in.
To
use
HTTPS,
an
HTTPS
certificate
must
first
be
in stalled.
Go
to
System
Options
>
Security
>
Certificates
to
install
and
manage
certificates.
See
Certificates
on
page
47
.
