Axis Q6034 Скачать руководство пользователя страница 21

Страница: 21 / 63

AXIS Q6034 PTZ Dome Network Camera

Video and Audio

3. Click

Save

For information about supported image formats, see the online help

Privacy Mask

A privacy mask is an area of solid color that prohibits users from viewing parts of the monitored area. Privacy masks cannot be

bypassed via the VAPIX® Application Programming Interface (API).

The Privacy Mask List,

Video & Audio

Privacy Mask

, shows all the masks that are currently con

gured in the Axis product and

indicates if they are enabled.

Since the Pan/Tilt/Zoom coordinates de

ne its size and position, a privacy mask is dynamic in relation to the monitored area. This

means that regardless of the angle and zoom of the lens, the same place or object will be hidden. To de

ne at what magni

cation the

mask should be displayed, zoom to the desired level and click

Set level

You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name.

For more information, see the online help

Important

Adding many privacy masks may affect the product’s performance.

Audio Settings

The audio functionality for each video stream is enabled under

Video & Audio

Video Stream

Audio

Note

A multi-connector cable (available from Axis;

Multi-Connector Cable (sold separately)

) is required when connecting external

audio equipment to the Axis product.

Audio Modes

The Axis product supports the following audio modes:

Full duplex -

Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no

echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex -

Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit audio using the

Live View page, use the

Talk

and

Listen

buttons, see

AMC Audio Controls, on page 11

Simplex — speaker only -

Audio is transmitted from a client to the Axis product and can be played by a speaker connected

to the product. To transmit audio using the Live View page, the

Talk

and

Microphone

buttons must both be active, see

AMC

Audio Controls, on page 11

Simplex — microphone only -

Audio captured by the product microphone is transmitted from the Axis product to one or more clients.

To set the audio mode, go to

Video & Audio > Audio Settings

and select the desired mode from the

Audio mode

drop-down list.

Audio Input

An external microphone or a line source can be connected to the product’s Audio-in connector. Con

gure the audio input settings

under

Video & Audio

Audio Settings

Note

A multi-connector cable (available from Axis;

Multi-Connector Cable (sold separately)

) is required when connecting external

audio equipment to the Axis product.

Содержание Q6034
































































Результаты поиска

Содержание Q6034

Отзывы:

Похожие инструкции для Q6034

Бренды по названию

Популярные бренды

Axis Q6034, Руководство пользователя

Результаты поиска

Содержание Q6034

Отзывы:

Похожие инструкции для Q6034

Бренды по названию

Популярные бренды