Axis Q6034 Скачать руководство пользователя страница 59

Страница: 59 / 63

AXIS Q6034 PTZ Dome Network Camera

Technical Speci

cations

Function/group

Item

Speci

cations

VCCI Class B

C-tick AS/NZS CISPR 22

KCC Class B

EN/IEC 60950-1

IEC 60529 IP52

IEC 60721-4-3 Class 3K3, 3M3, EN/IEC 60068-2

Midspan: EN 60950-1, GS, UL, cUL, CE, VCCI, CB, KCC, UL-AR

Weight

Camera: 2.6 kg (5.7 lb.)

Camera with drop-ceiling mount: 3.2 kg (7.1 lb.)

Included

accessories

AXIS T8123 High PoE Midspan 1-port, mounting kit for hard and drop ceilings, smoked

dome cover, Installation Guide, Installation and Management Software CD, Windows

decoder 1-user license

Video

management

software

AXIS Camera Companion (software included on CD) — Basic surveillance for small

businesses, where video is recorded to edge storage

AXIS Camera Station (sold separately) — Fully featured surveillance for medium-sized

installations, where video is recorded on a system server

For more information and software applications from partners, see

www.axis.com/products/video/software/

Optional

accessories

Multi-connector cable

Mounting Accessories

Video Surveillance Control Board

Illuminators

Installation Display

Multi-user decoder license pack

Midspan

Multi-Connector Cable (sold separately)

When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to

maintain the product’s IP rating. The multi-connector cable can be purchased from your Axis reseller.

Connect the multi-connector cable to the product’s multi-connector (see

page 6

). The cable provides the following connectors:

Note

See

page 57

for technical speci

cations.

Power connector -

3-pin terminal block used for power input. See image below.

Audio in (pink) -

3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).

Audio out (green) -

3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker

with a built-in ampli

er. A pair of headphones can also be attached. A stereo connector must be used for the audio out.

I/O terminal connector -

Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm noti

cations.

In addition to an auxiliary power and a GND pin, the I/O terminal connector provides the interface to:

• Digital output — For connecting external devices such as relays and LEDs. Connected devices can be activated by the

VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output

will show as active (shown under

System Options > Port & Devices > Port Status

) if the alarm device is activated.

• Digital input — An alarm input for connecting devices that can toggle between an open and closed circuit, for

example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and

the input becomes active (shown under

System Options > Port & Devices > Port Status

Содержание Q6034
































































Результаты поиска

Содержание Q6034

Отзывы:

Похожие инструкции для Q6034

Бренды по названию

Популярные бренды

Axis Q6034, Руководство пользователя

Результаты поиска

Содержание Q6034

Отзывы:

Похожие инструкции для Q6034

Бренды по названию

Популярные бренды