AXIS Q1656-DLE Radar-Video Fusion Camera
Configure your device
1. Set up the stream profile to include audio, see
Add audio to your recording on page 19
.
Turn on audio detection:
1. Go to
System > Detectors > Audio detection
.
2. Adjust the sound level according to your needs.
Create a rule:
1. Go to
System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
Audio
, select
Audio Detection
.
4. In the list of actions, under
Recordings
, select
Record video
.
5. In the list of storage options, select
SD_DISK
.
6. Select the stream profile where audio has been turned on.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 2 minutes.
9. Click
Save
.
Detect tampering with input signal
This example explains how to send an email when the input signal is cut or short-circuited. For more information about the
I/O connector, see
.
1. Go to
System > Accessories
and turn on
Supervised
for the relevant port.
Add an email recipient:
1. Go to
System > Events > Recipients
and add a recipient.
2. Type a name for the recipient.
3. Select
.
4. Type an email address to send the email to.
5. The camera doesn’t have it’s own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
6. To send a test email, click
Test
.
7. Click
Save
.
Create a rule:
1. Go to
System > Events > Rules
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under
I/O
, select
Supervised input tampering is active
.
4. Select the relevant port.
5. In the list of actions, under
Notifications
, select
Send notification to email
and then select the recipient from the list.
6. Type a subject and a message for the email.
18