AXIS Q1656-DLE Radar-Video Fusion Camera
Configure your device
3. Type the IP address of the host server.
4. Type the name of the shared location on the host server under
Network share
.
5. Type the username and password.
6. Select the SMB version or leave it on
Auto
.
7. Select
Add share even if connection fails
if you experience temporary connection issues, or if the share is not yet
configured.
8. Click
Add
.
Set up rules for events
To learn more, check out our guide
Get started with rules for events
Save power when no motion is detected
This example explains how to turn on power saving mode when no motion is detected in the scene.
Note
When you turn on power saving mode, the IR illumination range is reduced.
1. Start the application if it is not already running.
2. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to
System > Events
and add a rule.
2. Type a name for the rule.
3. Select
Invert this condition
.
4. In the list of actions, under
Power saving mode
, select
Use power saving mode while the rule is active
.
5. Click
Save
.
Trigger an alarm if someone opens the housing
This example explains how to trigger an alarm if someone opens the housing.
Add a recipient:
1. Go to
System > Events > Recipients
and click
Add recipient
.
2. Type a name for the recipient.
3. Select
.
4. Type an email address to send the email to.
5. The camera doesn’t have it’s own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
6. To send a test email, click
Test
.
7. Click
Save
.
Create a rule:
12