Axis Q1635-E Скачать руководство пользователя страница 9

Страница: 9 / 79

AXIS Q1635-E Fixed Network Camera

Hardware Overview

•

Connecting to AXIS Internet Dynamic DNS Service. See

page 60

. To connect, press and hold the button for about 3 seconds.

Function Button

The function button has multiple functions:

•

Levellino assistant

– This function helps to ensure the camera is level. Press the button for about 3 seconds to start the

levelling assistant and press again to stop the leveling assistant. The status LED and buzzer signal assist levelling of the
camera, see

Statis LED Behavior and Bizzer Signal for Levelling Assistant on page 10

. The camera is level when the

buzzer beeps continuously.

•

Focus assistant

– This function is used for enabling the Focus Assistant. To enable the focus assistant, press and very

quickly release the button. Press again to stop the focus assistant. For more information, see the Installation Guide.

LED Indicators

Note

• The Status LED can be configured to be unlit during normal operation. To configure, go to

Setup > System Options > Ports

& Devices > LED

. See the online help for more information.

• The Status LED can be configured to flash while an event is active.

• The Status LED can be configured to flash for identifying the unit. Go to

Setup > System Options > Maintenance

Status LED

Indication

Green

Steady green for normal operation.

Amber

Steady during startup. Flashes when restoring settings.

Note

The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to

Setup > System

Options > Ports & Devices > LED

. See the online help for more information.

Network LED

Indication

Green

Steady for connection to a 100 Mbit/s network. Flashes for network activity.

Amber

Steady for connection to a 10 Mbit/s network. Flashes for network activity.

Unlit

No network connection.

Note

The Power LED can be configured to be unlit during normal operation. To configure, go to

Setup > System Options > Ports &

Devices > LED

. See the online help for more information.

Power LED

Indication

Green

Normal operation.

Amber

Flashes green/amber during firmware upgrade.

Status LED Behavior for Focus Assistant

The status LED flashes when the Focus Assistant is active.

Содержание Q1635-E
















































































Результаты поиска

Содержание Q1635-E

Отзывы:

Похожие инструкции для Q1635-E

Бренды по названию

Популярные бренды

Axis Q1635-E, Руководство пользователя

Результаты поиска

Содержание Q1635-E

Отзывы:

Похожие инструкции для Q1635-E

Бренды по названию

Популярные бренды