AXIS Q1635-E Fixed Network Camera
Set Up the Product
Set Up the Product
The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click
Setup
in
the top right-hand corner of the Live View page.
•
Administrators
have unrestricted access to all settings.
•
Operators
have restricted access to settings, see
See also the online help
.
Basic Setup
Basic Setup provides shortcuts to the settings that should be made before using the Axis product:
1. Users. See
.
2. TCP/IP. See
3. Date & Time. See
4. Video Stream. See
5. Focus. See
6. Audio Settings. See
.
The Basic Setup menu can be disabled from
System Options > Security > Users
.
Adjust Focus
To adjust the zoom and focus follow these instructions:
Note
• Set focus as precisely as possible with the focus ring or Focus Assistant before starting automatic fine tuning. Using
the focus ring normally gives the best result.
• The iris should always be opened to its maximum while focusing. This gives the smallest depth of field and thus the
best conditions for correct focusing.
1. Open the product’s home page and go to
Setup
>
Basic Setup
>
Focus
.
2. Under the
Basic
tab, click
Open iris
. If the button is inactive the iris is already open.
3. If focus has been set before, click
Reset
to reset the back focus.
4. Loosen the zoom puller and the lock screw for the focus ring (see
) on the lens by turning
them counter-clockwise. Move the zoom puller and the focus ring to set zoom and focus and check the quality of
the image in the image window.
5. Re-tighten the zoom puller and the lock screw for the focus ring.
6. On the Focus page, click
Fine-tune focus automatically
and wait until automatic fine tuning is completed.
7. Click
Enable iris
. If the button is inactive the iris is already enabled.
8. If needed, make further adjustments under the
Advanced
tab. See the online help for more information.
20
