Axis M3007-P страница 54 Скачать руководство пользователя | Manualshive

Страница: 54 / 63

background image

AXIS M3007-P Network Camera

System Options

4. The card can now be removed.

Format SD Card

NO

NO

NOTICE

TICE

TICE

Formatting the SD card will remove all data and recordings stored on the card.

The Axis product can be configured to automatically format SD cards that are inserted into the product. If autoformat is enabled and
an SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, the
card will automatically be formatted to ext4.

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted
into the Axis product.

To enable automatic formatting, follow these steps:

1. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

2. Click

SD Card

.

3. Under

General Settings

, select

Autoformat to

.

4. Click

OK

to save settings.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the
SD card, follow these steps:

1. Insert the SD card in the SD card slot.

2. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

3. Click

SD Card

.

4. Click

Format

and select the desired file system.

5. Click

OK

to start formatting the card.

Encrypt SD Card Data

To prevent unauthorized individuals and systems from accessing recorded video, the SD card content can be encrypted. Encryption
can only be enabled when the card is unmounted. After enabling encryption, the SD card must be formatted so that no unencrypted
data remains on the card. The card must also be mounted before it can be used.

Note

If autoformat is enabled, the card will be formatted and mounted automatically when encryption is enabled. The format and
mount steps below should then be skipped.

To encrypt the SD card content:

1. Open the Axis product’s webpages and go to

Setup > System Options > Storage

.

2. Click

SD Card

to open

Storage Management

.

3. If the SD card is mounted, click

Unmount

to unmount the card.

4. Click

Encrypt

.

5. Select

Enable SD card encryption

and enter a passphrase.

6. Back in Storage Management, click

Format

to format the SD card.

54

«
...
52
53
54
55
56
...
»

Содержание M3007-P
































































Отзывы:

Нет отзывов

Похожие инструкции для M3007-P

Бренд: Safety Vision Страницы: 24

Бренд: QSee Страницы: 9

Бренд: QNect Страницы: 2

Бренд: Samsung Страницы: 1

Бренд: Comelit Страницы: 77

Бренд: Olympus Страницы: 116

Бренд: Clas Ohlson Страницы: 44

Micro Visioval 294200

Бренд: Virax Страницы: 36

Бренд: Sercomm Страницы: 73

EnerSys PERFORMANCE Series

Бренд: Odyssey Страницы: 18

Бренд: Baumer Страницы: 68

Бренд: Velleman Страницы: 20

Dometic Green Power GP60

Бренд: NDS Страницы: 224

Бренд: goxtreme Страницы: 187

Бренд: Connects2 Страницы: 2

Бренд: Bushnell Страницы: 19

Бренд: FLIR Страницы: 2

TRANSCENDENT VTD-TND5RME

Бренд: Vitek Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды