manualshive.com logo in svg

Axis DIGITAL LINE L06DUS, Инструкция по установке и эксплуатации

Поделиться
Скачать
Axis DIGITAL LINE L06DUS Скачать руководство пользователя страница 46

46

Maintenance

2

WARNINGS AND ALARMS

All alarms are also accompanied by a buzzer sound. 
The buzzer can be silenced by pressing a button.

Er1 - CAVITY PROBE ALARM

This error is shown when the cavity probe is faulty. Everything is deactivated except the light, and the cycle in progress is stopped.
 

Er2 - CORE PROBE ALARM

This error is shown when the core probe is faulty, in the cooking programs that use it. Everything is deactivated except the light, and 
the cycle in progress is stopped.

ALL - MOTOR ALARM

This error is shown when the motor overheats. Everything is deactivated except the light, and the cycle in progress is stopped.
When the alarm disappears, press the ON/OFF button and gold for 1 second to reset the alarm (the control panel switches to OFF).

H-t - CONTROL BOARD TEMPERATURE ALARM

This error is shown when the control board overheats. The cycle in progress is interrupted.
When the alarm disappears, press the ON/OFF button and gold for 1 second to reset the alarm (the control panel switches to OFF).

Содержание DIGITAL LINE L06DUS





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды