Axis AXIS P3353 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 56

background image

AXIS P3353 Network Camera

System Options

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating
systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

.

Storage

SD Card

The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card
with speed class 10.

NOTICE

NOTICE

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following file systems:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— supported by most operating systems for personal computers.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1. Insert the SD card in the SD card slot.

2. Go to

System Options > Storage

and click

SD Card

.

3. Click

Format

and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the
card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1. Go to

System Options > Storage

and click

SD Card

.

2. Click

Unmount

.

3. The card can now be removed.

The SD card is managed on the

System Options > Storage

page. Click

SD Card

to open

Storage Management

.

If the card’s status shows as failed, click

Check disk

to see if the problem can be found and then try

Repair

. This option is only

available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under

Recording Settings

, select

Remove recordings

older than

and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select

Lock

under

Recording Settings

.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for
recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to

www.axis.com/products/cam_companion_software/supported.htm

45

«
...
43
44
45
46
47
...
»

Содержание AXIS P3353

























































Отзывы:

Нет отзывов

Похожие инструкции для AXIS P3353

Бренд: V-Tec Страницы: 24

Бренд: Rae Страницы: 49

Бренд: UbiBot Страницы: 11

Бренд: jablotron Страницы: 30

Interlogix TX-E231

Бренд: United Technologies Страницы: 2

Бренд: StarVedia Страницы: 2

Бренд: Wiseup Страницы: 24

Бренд: IC Realtime Страницы: 11

Бренд: Bogen Страницы: 4

Бренд: D-MAX Страницы: 8

Бренд: Verint Страницы: 16

Бренд: Hanwha Vision Страницы: 10

Бренд: Partizan Страницы: 44

Бренд: Zip Страницы: 21

Бренд: Toa Страницы: 12

Бренд: Iqinvision Страницы: 12

Бренд: AccuLine Страницы: 2

Бренд: mPower Electronics Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды