Axis AXIS P3353 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 56

background image

AXIS P3353 Network Camera

System Options

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network
prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under

System Options > Network > QoS

. Using DSCP (Differentiated Services Codepoint) values, the

Axis product can mark the following types of traffic: live video, event/alarm traffic and management traffic.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the
group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the

System Options > Network > SNMP

page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2

provides the lowest level of security. The community name can be specified as a password for read or read/write

access to all supported SNMP devices. The default password for the

Read community

is public and the default password for the

Write community

is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2

are used by the Axis product to send messages to a management system on important events and status

changes. Check

Enable traps

and enter the IP address where the trap message should be sent and the

Trap community

that

should receive the message.

The following traps are available:

•

Cold start

•

Warm start

•

Link up

•

Authentication failed

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see . To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to Factory Default Settings, on page 48

.

UPnP

TM

The Axis product includes support for UPnP

TM

. UPnP

TM

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

TM

can be disabled under

System Options > Network > UPnP

TM

.

RTP/H.264

The RTP port range and multicast settings are configured under

System Options > Network > RTP

.

The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, only
certain IP addresses and port numbers should be used.

Select

Always Multicast Video

to start multicast streaming without opening an RTSP session.

44

«
...
42
43
44
45
46
...
»

Содержание AXIS P3353

























































Отзывы:

Нет отзывов

Похожие инструкции для AXIS P3353

Бренд: Panasonic Страницы: 44

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 32

HomeHawk KX-HNC800

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 100

BL-C10A - Network Camera - Pan

Бренд: Panasonic Страницы: 4

Бренд: Eaton Страницы: 12

Бренд: Vaxcel Страницы: 5

Etiampro ECAMTVI101

Бренд: Velleman Страницы: 11

Бренд: Vertiv Страницы: 16

IPC-HUM4231S-L4-0280B-S3

Бренд: Dahua Technology Страницы: 14

Бренд: media-tech Страницы: 2

Бренд: Eclipse Security Страницы: 28

Бренд: Ironton Страницы: 10

Бренд: Burg Wächter Страницы: 21

Бренд: Optex Страницы: 2

Бренд: i3 International Страницы: 2

Бренд: STEINEL PROFESSIONAL Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды