Axis 242 Скачать руководство пользователя

Страница: 53 / 73

AXIS 242S IV - Troubleshooting

Emergency recovery procedure

If power or the network connection to the AXIS 242S IV is lost during the upgrade, the

process will fail and the unit will become unresponsive. A flashing red Status LED indicates

a failed upgrade. To recover the unit, follow the steps below. The serial number is found on

the underside label on the product casing.

Unix/Linux

- From the command line, type the following:

arp -s <IP address of AXIS 242S IV> <Serial number> temp

ping -s 408 <IP address of AXIS 242S IV>

Windows

- From a command/DOS prompt, type the following:

arp -s <IP address of AXIS 242S IV> <Serial number>

ping -l 408 -t <IP address of AXIS 242S IV>

2. If the unit does not reply within a few seconds, restart it and wait for a reply. Press

CTRL+C to stop Ping.

3. Open a web browser and type in the AXIS 242S IV’s IP address. In the page that

appears, use the

Browse

button to select the upgrade file to use, e.g. axis242SIV.bin.

Then click the

Load

button to restart the upgrade process.

4. After the upgrade has completed (1-10 minutes), the unit will automatically restart and

show a steady green on the Power and Status LEDs and flashing green or amber on the

Network LED.

5. Reinstall the AXIS 242S IV.

If the emergency recovery procedure does not get the AXIS 242S IV up and running again,

please contact Axis support at www.axis.com/techsup/

Support

If you contact Axis support, please help us help you resolve your problems expediently by

providing a server report, log file and a brief description of the problem.

Server Report

- go to

Setup > System Options > Support Overview

. The server report

contains important information about the server and its software, as well as a list of the

current parameters.

Log file

- go to

Setup > System Options > Logs & Reports

. The Log file records events

within the unit since the last restart of the system and can prove a useful diagnostic tool

for troubleshooting.

Содержание 242










































































Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды

Axis 242, Руководство пользователя

Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды