Axis 242 страница 45 Скачать руководство пользователя

Страница: 45 / 73

AXIS 242S IV - System options

SNMP

The Simple Network Management Protocol (SNMP) allows the remote management of

network devices. Select the version of SNMP to use, depending on the level of security

required. Select the version of SNMP to use, by checking the appropriate box. The three

levels of security are:

• SNMP V1 - includes no security
• SNMP V2c - uses very simple security, e.g. community name as password
• SNMP V3 - provides encryption and secure passwords. Use with HTTPS.

If using V1 and V2c, enter the community name for read-only access to all supported

SNMP objects (except the root password and other objects that require write access).

Default value = public. You can also specify the community name for read/write access to

all supported SNMP objects (except read-only objects). Default value = pass.

If using HTTPS, enter the password if it has not already been set. To set the password

again, the AXIS 242S IV must be reset to the factory default settings.

UPnP™

The video server includes support for UPnP

™

in Windows ME and Windows XP. UPnP

™

enabled by default.

Note:

UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel
from the

Start Menu

and select

Add/Remove Programs

. Select

Add/Remove Windows Components

and

open the

Networking Services

section. Click

Details

and then select

UPnP

™ as the service to add.

RTP (Multicast)/MPEG-4

These settings are the IP address, port number, and Time-To-Live value to use for the

media stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers

should be used for multicast streams. For more information, please see the online help.

Ports & devices

I/O Ports

- the pinout, interface support and the control and monitoring functions

provided by this connector are described in

Unit connectors

, on page 49.

RS232

- The COM port RS-232 on the AXIS 242S IV supports several operational modes

listed on this page. For more information, please see

COM ports RS-232 and RS-485,

page 51.

RS485

- The COM ports on the AXIS 242S IV supports several operational modes listed on

this page. For more information, please see

COM ports RS-232 and RS-485,

on page 51.

Содержание 242










































































Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды

Axis 242, Руководство пользователя

Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды