Axis 242 Скачать руководство пользователя

Страница: 52 / 73

AXIS 242S IV - Troubleshooting

Troubleshooting

Checking the firmware

Firmware is software that determines the functionality of the AXIS 242S IV. One of your

first actions when troubleshooting a problem should be to check the currently installed

version. The latest version may contain a correction that fixes your particular problem. The

current firmware version in your AXIS 242S IV can be seen under

Setup > Basic

Configuration.

Upgrading the firmware

When you download firmware from the Axis Web site, your Axis product will receive the

latest available functionality. Always read the upgrade instructions and release notes

available with each new release, before updating the firmware.

New firmware can be downloaded to the AXIS 242S IV over the network.

Note:

Pre-configured and customized settings will be retained for use when the new firmware is running (pro-
vided the features are available in the new firmware) although this is not guaranteed by Axis Communica-
tions.

1. Save the firmware file to your computer. The latest version of the AXIS 242S IV

firmware is available free of charge from the Axis Web site at

www.axis.com/techsup

or from your local distributor.

2. Go to

Setup > System Options > Maintenance

in the video server’s Web pages.

3. In the

Upgrade Server

section and browse to the desired firmware file on your

computer. Click

Upgrade

Notes:

•Always read the upgrade instructions available with each new release, before updating the

firmware.

•After starting the process, you should always wait at least 20 minutes before restarting the AXIS

242S IV, even if you suspect the procedure has failed.

•Your dealer reserves the right to charge for any repair attributable to faulty updating by the

user.

Содержание 242










































































Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды

Axis 242, Руководство пользователя

Результаты поиска

Содержание 242

Отзывы:

Похожие инструкции для 242

Бренды по названию

Популярные бренды