AXIOMTEK SBC8166, Руководство пользователя

Страница: 60 / 90

SBC8166 Socket370 Full-size CPU Card Series User’s Manual
Award BIOS Setup
76
z
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/66 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA 33/66, select
Auto to enable BIOS support. The options available are Auto, Mode 0,
Mode 1, and Mode 2.
z On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled to activate each channel
separately.
z
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard. The options available are
Enabled, Disabled.
z
Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
The options available are PCI Slot, AGP.
z POWER ON Function
This option allows users to select the type of power ON sequence for
the system to follow. The default value is “Button-Only” .
BUTTON-ONLY
Follows the conventional way of turning OFF system power
(via power button).
Password
Upon selecting this option, the KB POWER ON Password line
appears. Press <Enter> and you’ll be prompted to enter and
confirm a password of your choice.
After setting the password, succeeding attempts to power ON
the system will result to null. For system to activate, user
must input the password via keyboard then press <Enter>.
Hot KEY
This option is very similar with that of Password. Hot-key
combinations range from Ctrl-F1 to Ctrl-F12. User may define
this combination from the Hot key Power ON option.
Mouse
Left
This allows system to POWER ON by clicking the left mouse
button. To enable, user must reboot and allow system to
finish booting up otherwise the setting will not take effect.
Mouse Right
This allows system to POWER ON by clicking the right mouse
button. To enable this setting, user must reboot and allow
system to finish the boot up process otherwise the setting will
not take effect.