AXIOMTEK SBC8166, Руководство пользователя

Страница: 55 / 90

SBC8166 Socket370 Full-size CPU Card Series User’s Manual
Award BIOS Setup
(-
z
Soft-Off by PWR-BTTN
This only works with systems using ATX power supply. It also defines
the type of soft power OFF sequence for system to follow.
Instant-Off
(default)
This option follows the conventional manner systems perform when
power is turned OFF. Instant-Off is a soft power OFF sequence
requiring only the switching of the power supply button to OFF.
Delay 4 Sec.
Upon turning OFF system from the power switch, this option will
delay the complete system power OFF sequence by approximately 4
seconds. Within this delay period, system will temporarily enter into
Suspend Mode enabling you to restart the system at once.
z PowerOn by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
z
Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode.
z
PCI LAN Card/Onboard LAN Wakeup
Wake On LAN alows your computer to be booted from another
computer via a network by sending a wakeup frame or signal. These
options enable or disable the wakeup function connected to the
Onboard LAN chip or external LAN card connector (PCI LAN Card
Wakeup).
z IRQ 8 Break Suspend
You can turn on/off monitoring of IRQ8 (the Real Time Clock) so it
doesn’t awaken the system from Suspend mode. The default value is
“Disabled” .
! ) $%;1$9 27
Enabled
"
z IRQ3 -7, 9-15, NMI The default value is “Disabled” .
Primary IDE 0 The default value is “Disabled” .
Primary IDE 1 The default value is “Disabled” .
Secondary IDE 0 The default value is “Disabled” .
Secondary IDE 1 The default value is “Disabled” .
Floppy Disk The default value is “Disabled” .
Serial Port The default value is “Enabled” .
Parallel Port The default value is “Disabled” .