UMAX141200. Wi-Fi to CAN Converter. Version 1
Page: 33-44
Same as with the
Direct Wireless Connection
, the IP monitoring devices need to use an
Axiomatic proprietary communication protocol to communicate with the Wi-Fi to CAN
converters. The users can use the CAN-ENET Software Support Package (SSP), p/n
AX140910, to write their own software or use Axiomatic PC software tools or Axiomatic
Ethernet to CAN converters, p/n AX140900, to communicate with the Wi-Fi to CAN converter
over IP network.
6.4 Wireless CAN Bridge Configuration Example
An example of the converter settings for a CAN wireless bridge with two Wi-Fi to CAN
converters is presented below.
The first converter is set to AP mode. We can use the default settings, see Table 3 and Table
4. The second converter should be in STA mode with security/password the same as the first
converter, see Figure 29.
Figure 29. Wireless CAN Bridge Wi-Fi Settings
Do not reboot the converter right after saving the new Wi-Fi settings. Otherwise, the link with
the user’s device running the web browser can be lost.
The
IP Network Settings
of the second converter should be configured the way that its IP
address be different from the IP address of the first converter, the client mode should be
