UMAX141200. Wi-Fi to CAN Converter. Version 1
Page: 16-44
Figure 10. IP Network/CAN Settings Configuration Webpage
The
Save Settings
button will save configuration parameters in non-volatile memory. Except
for the Wi-Fi settings, the appropriate converter subsystems will be restarted without rebooting
of the whole converter and the new parameters will be applied immediately. If necessary, the
rebooting is available from the
Diagnostics
or
Wi-Fi Settings
page.
The
Discard Changes
button will bring back the original converter settings before they have
been changed on the website. In case the user leaves the page without saving, all changes will
be also discarded.
The
Set Defaults
button will load the default values of the configuration parameters into the
data fields on the configuration page.
The configuration parameters have tooltips for the user convenience.
When the user presses
Save Settings
button, the web page runs a script to check the validity
of the new configuration parameters before uploading them to the web server. For example,
the following alert message will be displayed if the user enters the same value for the
Device
Port
and the
Web Server Port
, see Figure 11.
Figure 11. Settings Alert. Error in Configuration Parameters
The website messages should be enabled (not suppressed) in the browser to see this and
other feedback messages.
