manualshive.com logo in svg

AXIOMATIC AX141200, Руководство пользователя

Поделиться
Скачать
AXIOMATIC AX141200 Скачать руководство пользователя страница 13

 

UMAX141200. Wi-Fi to CAN Converter. Version 1 

 

 

 

 

 

Page: 13-44

3  CONVERTER CONFIGURATION 

The converter supports configuration over the internal website running on the device 
embedded web server. To configure the device, the user should establish a wireless Wi-Fi 
connection between the converter and a user’s device, which can be, for example, a laptop or 
a smartphone. 

3.1 Wireless 

Connection 

The converter default wireless settings, configured at the factory, are presented in Table 2. 
The user’s device should use these settings to connect to the Wi-Fi to CAN converter. 
 

Table 2. Wi-Fi Default Settings 

Parameter 

Default Value

Connectivity Mode 

AP (Access Point)

Country/Region Code

USA 

AP Channel 

6 (2.4GHz frequency band)

Security 

WPA / WPA2

1 

SSID (Network Name) 

Axiomatic_CANWiFi

Password 

CANWiFi_16025

1

WPA / PSK and WPA2 / PSK security types, or a mixed mode of WPA / WPA2 PSK security type 

(TKIP, AES, mixed mode). 

 
In case the converter settings were changed at the customer site, the default settings can be 
activated by pulling the DIN_nWIFI_DEFAULT input low on power-up. This can be achieved by 
connecting the DIN_nWIFI_DEFAULT input to DIN_GND. The Status LED on the housing will 
be flashing yellow in this case. 
 
The default Wi-Fi settings, activated by the DIN_nWIFI_DEFAULT input, do not rewrite the 
original Wi-Fi settings in the von-volatile memory. The converter will return to its original 
settings after the next power-up or reboot. 
 
When the default settings are used, the converter will appear on the list of available Wi-Fi 
networks on the user’s device, see an example on Figure 5. 
 

 

Figure 5. Converter AP on the List of Available Networks 

 
The user should connect to the converter using the default password “CANWiFi_16025” and 
with the manual IP settings. The assigned IP address should not conflict with the converter 

Device IP Address

 (default value 192.168.0.34) and with addresses of other devices 

connected to the user’s device, if any. See an example on Figure 6. 
 
When the wireless connection is established, the user can access the converter embedded 
web server using any web browser on their device. The web browser should be pointed to the 

Содержание AX141200














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды