Axiom SBC8153 Скачать руководство пользователя страница 57

Страница: 57 / 76

SBC8153 Pentium All-in-One CPU Card Family User’s Manual

Intel PIIX Bus Master IDE Driver Installation

C h a p t e r 6

Intel PIIX Bus Master IDE Driver

Installation

This chapter describes the installation procedure for Intel PIIX Bus
Master IDE Drivers for Windows 95.

6.1

System Requirements

This section describes system requirements for the PIIX Bus Master
IDE Device Driver for Windows 95*. This driver has been designed for
and tested with Windows 95 only. This driver will only install on
systems with Windows 95.

The system must contain a supported Intel processor and
chipset configuration.

Ensure that a mouse is connected to the system.

One of the following versions of Windows 95* must be
installed on the system prior to running utility program.

Windows 95* 4.00.950 (Retail)

Windows 95* 4.00.950a (OSR1)

Windows 95* 4.00.950b (OSR2 without USB Supplement)

Windows 95* 4.00.950b (OSR2.1 with USB Supplement)

This utility should only be used on desktop systems. The
utility must not be executed on notebook or portable
systems with or without dock.

It is assumed that the BIOS properly initialized the
82371xB IDE interface for Bus Master IDE operation.

There are no other non-82371xB IDE controllers (add-in
IDE controller or sound card with IDE) enabled on the
system.

Содержание SBC8153













































































Результаты поиска

Содержание SBC8153

Отзывы:

Похожие инструкции для SBC8153

Бренды по названию

Популярные бренды

Axiom SBC8153, Руководство пользователя

Результаты поиска

Содержание SBC8153

Отзывы:

Похожие инструкции для SBC8153

Бренды по названию

Популярные бренды