Axiom SBC8153, Руководство пользователя

Страница: 36 / 76

SBC8153 Pentium All-in-One CPU Card Family User’s Manual
Award BIOS Setup
30
"
Boot Sequence
This field determines the drive that the system searches first for an operating
system. The options are :
!
A, C, SCSI
!
D, A, SCSI
! SCSI, C, A
!
C, A, SCSI
!
E, A, SCSI
! C only
! C, CDROM, A
! F, A, SCSI
!
LS120, C
! CDROM, C, A
! SCSI, A, C
The default value is A, C, SCSI.
"
Swap Floppy Drive
This item allows you to determine whether to enable the swap Floppy Drive or
not. When enabled, the BIOS swaps floppy drive assignments so that Drive A
becomes Drive B, and Drive B becomes Drive A. By default, this field is set to
Disabled.
"
Boot Up Floppy Seek
When enabled, the BIOS will seek whether or not the floppy drive installed has
40 or 80 tracks. 360K type has 40 tracks while 760K, 1.2M and 1.44M all have
80 tracks. By default, this field is set to Enabled.
"
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the system.
By default, the system boots up with NumLock ON.
"
Boot Up System Speed
This has no function and selects the default system speed (High).
"
Gate A20 Option
This field allows you to select how Gate A20 is worked. The Gate A20 is a
device used to address memory above 1 MB. By default, this field is set to Fast.
"
Security Option
This field allows you to limit access to the System and Setup. The default value
is Setup. When you select System, the system prompts for the User Password
every time you boot up. When you select Setup, the system always boots up and
prompts for the Supervisor Password only when the Setup utility is called up.
"
PCI/VGA Palette Snoop
Some display cards that are non-standard VGA may not show colors properly.
This field allows you to set whether MPEG ISA/VESA VGA Cards can work with
PCI/VGA or not. When this field is enabled, a PCI/VGA can work with a MPEG
ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with a
MPEG ISA/VESA Card.