Axiom SBC8153, Руководство пользователя

Страница: 42 / 76

SBC8153 Pentium All-in-One CPU Card Family User’s Manual
Award BIOS Setup
36
"
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7
assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA bus and is
not available to any PCI slot.
"
Used MEM base addr
This field allows the user to set the base address and block size of a legacy
(non-PnP) ISA card that uses any memory segment within the C800H and
DFFFH address range. If the you have such a card and are not using an ICU
(ISA Configuration Utility) to specify its address range, select a base address
from the six available options. During selection, the “Used MEM Length” field will
appear with the block size options. If you have more than one legacy ISA card in
your system that require the use of this address range, you can increase the
block size to either 8K, 16K, 32K or 64K. If you are using ICU to accomplish this
task, leave “Used MEM base addr” to its default setting of N/A.
4.7 Load BIOS Defaults
This option allows you to load the troubleshooting default values
permanently stored in the BIOS ROM. The default settings are non-
optimal and disable all high-performance features.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP INTEGRATED PERIPHERALS
BIOS FEATURES SETUP SUPERVISOR PASSWORD
CHIPSET FEATURES SETUP USER PASSWORD
POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION
PNP/PCI CONFIGURATION SAVE & EXIT SETUP
LOAD BIOS DEFAULTS EXIT WITHOUT SAVING
LOAD SETUP DEFAULTS
ESC : Quit
# $ % &
: Select Item
F10 : Save & Exit Setup (Shift) F2 : Change Color
Load BIOS Defaults except Standard CMOS Setup
To load BIOS defaults value to CMOS SRAM, enter Y .
Load BIOS Defaults (Y/N)? N