Axio MET AX-582, Руководство по эксплуатации

Страница: 11 / 12

11
NOTE:
1. The function is only for testing AC standard live wire (AC 110V~AC380V)
2. Be careful to operate at this range.
4.11. Data Hold
Press the Hold switch, the measured value is held on LCD, press it again and the function is
cancelled.
4.12. Auto Power Off
The meter will be into sleeping mode when it works for (20
±
10) minutes. Press “POWER” key twice
to restart the power.
4.13. Backlight
Press “B/L” key to turn on the backlight, and it will turn off after 15 secretary.
NOTE:
When turning on backlight, the working current will be enlarged, it leads to shorten battery usage
and enlarge accuracy of some functions.
5. Maintenance
Do not try to modify the electric circuit.
5.1. Keep the meter away from water, dust and shock.
5.2. Do not store and operate the meter under the condition of high temperature, high humidity,
combustible, explosive and strong magnetic place.
5.3. Wipe the case with a damp cloth and detergent, do not use abrasives and alcohol.
5.4. If do not operate for a long time, should take out the battery to avoid leakage.
5.4.1. When “ ” signal displays, should replace the battery following the steps.
5.4.1.1. Unlock the button and remove the battery case.
5.4.1.2. Take out the old battery and replace the new one. It’s better to use alkaline battery for
longer life.
5.4.1.3. Fit on the battery case and lock the button.
5.4.2. Fuse change: When replacing fuse, please change another same type and specification fuse.