Axio MET AX-582, Руководство по эксплуатации

Страница: 5 / 12

5
2.2.4. AC Current (ACA)
Range Accuracy Resolution
200 mA ± (2,0 % + 5) 100 µA
2 A ± (3,0 % + 5) 1 mA
20 A ± (3,0 % + 10) 10 mA
Max. measuring volt drop: 200mV
Max. input current: 20A ( the test time should be in 10 seconds)
Overload protection: 2A/250 V quick-action fuse, 20A un-fused
Frequency response: (40
~
200) Hz
Display: sine wave RMS (mean value response)
2.2.5. Resistance (
Ω
)
Range Accuracy Resolution
200 Ω ± (0,8 % + 5) 0,1 Ω
2 kΩ ± (0,8 % + 3) 1 Ω
20 kΩ 10 Ω
200 kΩ 100 Ω
2 MΩ 1 kΩ
200 MΩ ± [5,0 %(RDG -10) +20] 100 kΩ
Open Voltage: less than 3V
Overload protection: 250V DC and AC peak value
NOTE:
A. At 200 Ω range, should make the test leads short, and measure the wire resistance, then subtract
from the actual measuring.
B. At 200M Ω range, should make the test leads short, the meter will display 1.0M Ω. It’s normal and
has no effect on the accuracy. Should be subtracted from actual measuring.