ADDITIONAL SETUP TASKS
ENG
Page 60
To save a new setting, press Enter twice.
Press Esc to exit without saving any changes.
Press Esc again, or select the Quit option on the display, to return to the next higher menu layer.
20.3 NOISE GATE SETTING (NOISE GATE)
The Noise Gate function allows you to avoid the effects of background noises while the input signal presents
a lack of high frequencies. The parameter to be set is the Noise Gate Threshold, which determines the
threshold value below which the dynamic pre-emphasis is automatically excluded.
Once you have identified this function within the Output Calibration submenu, use the shuttle to select:
-
Noise Gate Threshold: This may be adjusted within a range of –80 to –51dB (1 dB steps).
The Noise Gate function can be turned off if necessary by turning the shuttle counter-clockwise to the Off
position.
The default level is –76dB.
To save a new setting, press Enter twice.
Press Esc to exit without saving any changes.
Press Esc again, or select the Quit option on the display, to return to the next higher menu layer.
Содержание Falcon 35
Страница 2: ......
