Axel Falcon 35, Руководство по эксплуатации

Страница: 46 / 99

I/O CALIBRATION AND SYSTEM SETUP
ENG
Page 46
19 I/O CALIBRATION AND SYSTEM SETUP
The processor is designed for easy installation and set up. All necessary interface connections are made
through rear panel connectors. Refer to Rear Panel Connectors Chapter for a description and placement of
each of the connections.
With proper installation and calibration the processor will give you the most accurate results for
audio processing and modulation. Take the time to go through the steps provided in this chapter to
ensure you get the most out of your equipment.
Power on the unit: the main (default) screen:
will appear in the window display.
Before starting, make sure the unit is running all the default parameters values, as set in the
factory at the delivery time. See the final pages for the list of default settings for reference.
19.1 ANALOG / DIGITAL AUDIO INPUT SELECTION
Skip this step if you do not have the optional DG-IN module installed or if you are not using the digital audio
input.
Firstly, You have to chose whether You will use the analog input or the digital audio input
The unit is shipped from the factory with the ANALOG input activated. With e DG-IN option installed, You
may enable the digital audio input by entering the DGINP MODULE menu and switching the Digital Input
ON:
DEFAULT SCREEN
OPTIONAL CONTROLS menu
DIGINP MODULE page
Digital Input ON
Remarks:
-
Connect only one type of signal at a time (coaxial or optic) to avoid malfunctions.
- The
Digital Input LED on the front panel GLOWS when the digital input is active.
-
Enabling digital input simultaneously cuts out analog input.
-
The digital input audio level may not be adjusted.