I. SCALE OPERATION
Place the scale on a horizontal flat surface and set the scale
platform on the weighing surface.
1. Press [ ON/OFF ] key.
2. Wait until “0.0g” or “0.00g” is displayed.
3. Place the object(s) on the weighing tray.
4. By pressing the [ MODE ] key, you can switch the weighing
unit displayed on the bottom right.
5. The cover / expansion tray can be used by following the
TARE WEIGHING instructions below.
II. TARE WEIGHING
1. Turn on the scale as described above.
2. Place the cover / expansion tray on the scale platform.
3. Press the [ TARE ] button. “0.0g” or ”0.00g” will be displayed.
4. You can now add items to the tray to obtain just the weight
of the contents.
5. When all items are removed, a negative number will be
displayed. Press [ TARE ] again to zero the scale.
III. COUNTING MODE
1. Press the [ ON/OFF ] key to turn the scale on.
2. Place a sample quantity of the items being weighed on
the platform. This quantity should either be 25, 50, 75, or 100
pieces.
3. Once the weight is stable, press and hold the [ PCS ] key to
enter counting mode setup.
3. The current sample size will be displayed on the bottom
right of the LCD.
4. Press the MODE key to change it between 25, 50, 75, or 100
and press PCS to confirm. The count will be displayed on the
bottom right of the LCD. You may now add more items are
remove items and the count will update automatically.
IV. CALIBRATION
1. Press the [ ON/OFF ] key to turn the scale on.
