Revisão: 02
Data de Criação: 00.00.0000
Data de revisão: 24.01.2019
15
Figure 17 - Screen of radio.
Click on Save button to update the informations.
2.5
NETWORK
On the Network Screen there is two Tabs (Ethernet and Wi-Fi), both are suited to
define the parameters for this two kind of communication of the Gateway. The Tabs
are shown on the image below:
Figure 18 – Network Screen
On the Ethernet operational mode there is the following options:
DHCP
Server, Static IP, Dynamic and Default
.
On the Wi-Fi operational mode the options are:
DHCP Server, Static IP,
Dynamic, Disabled and Default.
2.5.1
ETHERNET NETWORK SETUP
The Ethernet configuration tab is used for selection of the operational mode of
the Ethernet interface.
As was said previously the operational modes are DHCP Server, Static IP,
Dynamic and Default as seen on the image below: