Revisão: 02
Data de Criação: 00.00.0000
Data de revisão: 24.01.2019
7
Main Group
Figure
Description
AWPLC
GATEWAY
Operation
The
RUNTIME
LED blinks if the AWPLC is
running normally. It remains off at the
initialization time and in case of Fail Conditions.
The
POWER
indicators remains on if the MPU is
energized and the AWPLC is ready to run.
AWBUS
The
RX AWBUS
LED blinks whenever the radio
receive a valid data package.
The
TX AWBUS
LED blinks whenever the radio
transmit a data package.
The
STATUS AWBUS
LED blinks to indicate
network association. If the LED remains off, then
no network association was made.
TCP/IP
The
RX TCP/IP
LED blinks whenever the
Ethernet Module receive a data package over
TCP/IP protocol that must be processed by
runtime.
The
TX TCP/IP
LED blinks whenever the
Ethernet Module transmit a data package over
TCP/IP processed by runtime.
FAULT
CONDITION
This LED
FAULT
turns on during any fault
condition except for Processing Unity fault. For
this last exception, after the initialization
sequence, if the RUNTIME LED does not blink
and the FAULT LED remains off, then the user
may conclude that there is a Processing Unity
Fault condition.
