Award WO500, Руководство пользователя

Страница: 24 / 33

You can set a time between the time range of 0 and 24.
When the time is up, the timer gives an audible warning and the symbol disappears on the
screen.
Timer Adjustment is for warning purposes only. The oven will not be activated at this
function.
This function can be used to set a time which you wish to be reminded of after a certain period
of time.
Among the 5 buttons beneath the timer, press the button on the far left with the symbol.
Three zeros will appear on the timer screen and the dot in the middle and the symbol beneath
the dot will begin to flash. You can adjust the desired period of time by using the (+) and (-)
buttons while in this position. After the adjustment is done, if you wish the screen to remain at
the same position you set, do not press any button following the adjustment. If you leave the
screen in this position, you can see the countdown of the time period you set on the screen.
The counting operation is performed as minutes up until it reaches 1 min. When it drops below
1 minute, the counting will be performed as seconds. If you wish the screen to return to the
timer screen, press the button with the symbol on the far left.
The time must be adjusted before starting to use the oven.
Following the initial power supply to the oven, three zeros will begin to flash on the right display.
Press the second button from the left with the
symbol and the third button with the
symbol simultaneously. The zeros will begin to light continuously and the dot in the middle
will begin to flash. While in this position, you can adjust the time by using the (+) and (-) buttons.
After the adjustment, it should be expected that the dot in the middle will be lit continuously.
After the time adjustment, the oven will be operable at manual function. When the oven is
adjusted to any function, the timer screen will show a cooking symbol and the oven starts to
operate.
Adjusting the time :
Timer Adjustment :
As the adjusted time will be reset in the event of a power failure, time adjustment
operation will have to be performed again.
Push the function button forward to select the desired cooking function. Turn the protruding
button clockwise until you see the desired function on the display part. When you select the light
function, only the oven illuminating light will operate and the display part will show "Lit". When
the defrost function is selected, temperature adjustment for the oven interior cannot be made
and the display will show “Del”. When turbo and the lower-upper fan are adjusted to the pizza
position, the oven interior temperature will be seen as 175°C on the display. Adjust the desired
temperature by using the "+" and "-" keys. When adjusted to grill, double grill, double grill+fan
positions, the oven interior temperature will be seen as 200°C on the display. Adjust the desired
temperature by using the "+" and "-" keys.
Use the "+" and "-" keys beneath the temperature indicator for oven interior temperature
adjustment. The oven interior temperature can be increased or decreased by stages of 5
degrees each.
Oven Function Selection :