Award WO500, Руководство пользователя

Страница: 15 / 33

13
4.3 The Features of Your Hob
You can adjust each burner of your product to 6 stages.
0- Off position
1- Lowest temperature position
6- Highest temperature position
The Dual Burner can heat in 2 different positions. You can save power and time by
running stage 1 for small pots (o 115mm) and stages 1 and 2 (o 180mm) simultaneously for
large pots.In order to run the small diameter part of the dual burner, press the
“Dual Burner Selection Button”. When you press the selection button the corresponding warning
light will be on. Then you can increase or reduce temperature using the corresponding "+"
button. In order to turn off the dual stage, just press the “Dual Burner Selection Button”.
The signal light corresponding to that stage will go off. The outer stage of the dual burner
cannot be used individually. The oval burner is controlled via the same button used for the dual
burner. You can run the round head (o 145 mm) of the oval burner individually, as well as use
its oval.Its operation is the same as with the dual burner. When the burners are switched off,
the surfaces will continue to remain in heated position for a while. In that case the letter “H” will
appear on the hob indicators and warn you. When the surface is cooled off the sign will disappear.
4.4Using The Glass Burner
Resistance of the vitroceramic glass to heat and extreme changes of temperature is very high.
A redness will be noticed on the heated surface with time. When any heating unit is run, you
may hear a weak sound; this is normal and it has to do with the technical structure of the
system.
It does not pose any problems in terms of quality. In case sharp-edged pots should rub against
or roughly placed on the vitroceramic glass, the surface may become damaged. It is
recommended that you pay attention to this.
CORRECT
WRONG
pot bottom is round
WRONG
pot diameter is small
WRONG
pot bottom does not sit well