Award WO500 Скачать руководство пользователя страница 23

The oven will start operating at the time calculated by deducting the cooking period from the
set finishing time, and will stop at the set finishing time. The timer will give an audible warning
and the symbol (A) will begin to flash. After bringing the oven button and oven thermostat button
to 0 position, pressing any button of the timer will end the audible warning. Also, the timer will
be brought to manual use function.

First; keep pressing on the MODE button until you see "stop" on the timer screen. When you
see "stop" on the timer screen, the symbol (A) will begin to flash. Adjust the cooking period for
the food you wish to cook, by using the (+) and (-) keys while the timer is in this position. Some
time after the adjustment operation is completed, the day’s time will appear on the screen and
the symbols (A) and

will begin to continuously light on the screen (Figure 14).

A cooking period between the time range of 0 and 10 hours can be set.

8888

8888

Second; keep pressing on the MODE button until you see "end" on the timer screen. When
you see "end" on the timer screen, the symbol (A) and the day’s time will begin to flash, with
the addition of the set cooking period. Adjust the finishing time for the food, by using the (+)
and (-) keys while the timer is in this position. Some time after the adjustment operation is
completed, the day’s time will appear on the screen and the symbol (A) will begin to
continuously light on the screen (Figure 15).

You can set a time which can be up 23.59 hours after the time obtained by adding
the cooking period to the day’s time.

4.10 USING THE PROGRAMMING TIMER FOR THE BUILT-IN ELECTRONIC OVEN:

-

+

4.9 DIGITAL MINUTE TIMER

Si multaneously pres

+

and – buttons of digital timer.

The display will start flashing, and then you can set the time
setting by using + and – buttons.
When you pres + or – buttons after setting the time,
( )

symbol is displayed, and the desired timing is set.

At the end of this time period, timer will make a beep sound
but the oven continues working. In order to turn the oven off,
you must take the switch and thermostat of the oven to closed position.

Содержание WO500


































Отзывы: