Important Safeguards and Warnings
The manual will help you to use the Device properly. Read the manual carefully
before using the Device, and keep it well for future reference.
Do not press hard, violently vibrate, and soak the Device when transporting
and storing it. Complete package is necessary during the transportation. We
will assume no responsibility for any damage or problem caused by incomplete
package during the transportation.
Protect the Device from falling down or heavy vibration.
Buckle the safety hook before installing the Device if it is included.
Keep the Device away from devices that generate electromagnetic field like
televisions, radio transmitters, electromagnetic devices, electric machines,
transformers, and speakers; otherwise image quality will be influenced.
Keep the Device away from smoke, vapor, heat, and dust.
Do not install the Device near heating furnace, spotlight, and other heat
sources. If it is installed on ceiling, in kitchen or near boiler room, the Device
temperature might rise.
Do not dissemble the Device; otherwise it might cause dangers or device
damage. Contact your local retailer or customer service center for internal
setup or maintenance requirement.
Make sure that there is no metal, or inflammable, explosive substance in the
Device; otherwise it might cause fire, short-circuit, or other damage
Avoid sea water or rain eroding the Device.
Avoid the lens aiming at intense light source, including sunlight and
incandescent light; otherwise the lens might be damaged.
It is recommended to use the Device with a lightning-proof device for better
lightning-proof effect.
Before installing the Device, you need to confirm the salt spray tolerance level.
Do not install the Device in an environment with higher salt spray level than the
Device can tolerate. There are three salt spray tolerance levels of cameras.
Devices with higher salt spray tolerance level can be installed in an area
within 1500m by the sea, or offshore platform.
Devices with medium salt spray tolerance level can be installed in an area
1500m away from the sea.
Devices not salt spray tolerant can only be installed in an area 3000m away
from the sea.
After unpacking, if the packing bag is damaged or leaking air, and the
desiccant particles are of different colors, the normal use of the Device will not
be affected.
For the Device that supports laser, do not aim the laser directly at eyes. And
keep a proper distance from the flammable to avoid fire.
Operating Requirements
