Avtron M6C-4, Инструкция по эксплуатации, Страница: 3 / 7

M6C-4, M6C-5 3
A40346
Physical properties of cable such as abrasion, tensile strength,
solvents, marine applications, etc., are dictated by the specific
application. Requirements for hazardous locations are dictated by
the relevant codes. General wire electrical requirements wire each
pair individually shielded with braid or foil with drain wire, 0.05 uF
maximum total mutual or direct capacitance, outer sheath insulator,
2,000 ft. max. (see line driver specifications.) Temperature ratings of
wire and wire glands should be 20°C over the maximum expected
ambient or motor temperature to allow for temperature rise in the
M6C itself. Ground wires must be a minimum of 14AWG.
MAINTENANCE
CAUTION
Do not open the M6C housing. Doing so will void the
warranty and may cause the risk of fire or explosion.
M6C PART NUMBERS AND AVAILABLE OPTIONS
Model Bore Size
Mounting
Style
Line Driver
Left & Right
Output Range
Base
PPR
Marker Connector Modifications
M6C-
0- Non-Standard
4- 1"
5- 1 1/8"
S- End of Shaft 8- 5 to 24 VDC X- None
L- Low Range
(Base PPR x 1/2)
M- Medium Range
(Base PPR x 1)
H- High Range
(Base PPR x 2)
48- 480
51- 512
60- 600
See below
for addi-
tional PPR
options
Z- Marker
– - None
K- 1/4 AB Cycle
Sync w/AB
High
T- Conduit Box,
Terminal Block,
3/4" NPT
W- Conduit Box,
Terminal Block
and Wire Gland
000- None
001- Low Temp (-40°C)
003- Torque Arm B28390
005- Low Temp (-40°C) &
Torque Arm
RESOLUTIONS
OUTPUT
RANGE
-48 BASE PPR -51 BASE PPR -60 BASE PPR
L = LOW 240 256 300
H = HIGH 960 1024 1200
There are no field replaceable parts in an M6C. The unit should be
returned to the factory for all repairs.
Build up of large amounts of contamination are to be avoided,
therefore periodic external cleaning is recommended.
The condition of the bearings is important to the safety of the
explosion-proof housing. The bearing manufacturer’s rated life (see
specifications) can be adversely affected by application specific
conditions. If the unit shows signs of bearing wear indicated by noise
or degradation of the electrical signal output, it should be returned to
the factory for repair.
OUTPUT RANGE MUST = M
EXTENDED RESOLUTIONS
BASE PPR PPR BASE PPR PPR
A0 NON-STD AW 1000
BC 50 BK 1365
AF 60 CX 1500
AK 80 A3 2000
AG 100 A4 2048
AH 120 BA 2400
AA 128 A5 2500
AM 200 CG 3000
AE 360 AT 3072
AC 400 A7 3600
48 480 BB 4000
AQ 500 AD 4096
51 512 A8 4800
60 600 A9 5000
AU 720 A2 8192
AV 900 BL 16384